Silvercrest SSR 1080 A1 - Manual (Page 20)

Digital HD Satellite Receiver SSR 1080 A1
English - 18
Delete
Press the blue button (37) and mark the channels to be
deleted by pressing the OK button (34). Press the OK button
(34) again to undo the selection. When quitting, a safety
prompt will ask you if you want to save the changes.
Radio Channel List
To manage the radio channels. The procedures do not differ
from the items described under TV Channel List.
Delete all
The "Delete All" function will erase the entire channel list and
is useful when reinstalling the satellite receiver and you are
planning to launch an automatic channel search.
Save as Default
Your satellite receiver already has a built-in channel order
and satellite list that you may edit, if required. After
performing a factory reset or after upgrading the software the
channel order will be reset to factory default and all custom
settings will be lost. To keep your custom channel order you
can select the "Save as Default" function. This will help you
keep your custom order after a reset or software upgrade.
However, you can also save different channel list versions
on a USB disk and restore at a later time (see page 32 -
Save to USB).
Installation
The Installation menu contains all required settings for
customising the device to the satellite system and for saving
your channels.