Silvercrest SMZS 1600 A1 - Manual (Page 61)

61
2 Unpacking and assembling
GB
CY
IE
2.3 Using further nozzles
(accessories) Besides the floor nozzle you just attached, you may extend
the functions of your cylinder vacuum cleaner with other
nozzles as follows:
„ The supplied accessories include:
- Furniture brush (Fig. 5/1)
For cleaning delicate surfaces.
- Crevice nozzle (Fig. 5/2)
For vacuuming spots difficult to reach.
- Parquet brush (Fig. 6)
For vacuuming especially delicate surfaces (e.g. par-
quet, laminate) with its long, soft bristles.
„ The following accessories are also available:
- Turbo brush (Fig. 7)
For thoroughly deep cleaning carpets with the revolv-
ing brush head.
This is how to attach the nozzles:
1. Switch off the vacuum cleaner and pull the plug from the
mains socket.
2. Pull the attached nozzle off of the telescopic tube.
3. Attach the desired nozzle to the bottom end of the tele-
scopic tube (Fig. 8/1) or if necessary directly to the han-
dle (Fig. 9/1).
NOTE:
You can order the turbo brush with article no. 208-8 as
described in
ZChapter 6.2, "Sources".
WARNING:
Danger of injury! Only attach the nozzles if the appliance
is not connected to the power supply. Otherwise the
machine might start up and parts of your body, hair or
pieces of clothing might be sucked in.
ATTENTION:
Use only intact nozzles. Defective nozzles may scratch
or damage surfaces and objects.
5
6
7
8
9