Epson STYLUS DX6000 - Manual (Page 9)

Handling Paper 7
En
g
lis
h
4. Set the paper as shown in the following
illustrations.
5. Flip the feeder guard back.
Also make sure the paper thickness lever is set
down to the m position.
Note:
Make sure you do not load more than the recommended
number of sheets. Check the Paper Type setting before
printing to make sure it matches the type of paper you have
loaded (& “Selecting Paper” on page 6).
The printable
side is often
whiter or
brighter than
the other side.
make sure it
fits under the
arrow inside
the left edge
guide
place behind
the tabs
10 × 15 cm (4 × 6 in.) and 13 × 18 cm (5 × 7 in.)
A4
The LCD screen indicates that the lever
has been moved and the m or ^ position
has been changed.