EPoX Computer KP6-FX2 - Manual (Page 11)

11
Introduction 1-5
1-3 I/O Shield Connector
The KP6-FX 2 is equipped with an I/O back panel. Please use the appropriate I/
O shield. (refer to figure 1-3)
ATX
POWER SUPPLY
KP6-FX 2 Board
1-3.1 Power-On/Off (Remote)
The KP6-FX 2 has a single 20-PIN connector for ATX power supplies. For ATX
power supplies that support the Remote On/Off feature, this should be connected
to the systems front panel for system Power On/Off button. The systems power
On/Off button should be a momentary button that is normally open.
The KP6-FX 2 has been designed with “Soft Off" functions. You can turn Off the
system from one of two sources: The first is the front panel Power On/Off button,
and the other is the "Soft Off" function (coming from the KP6-FX 2’s on-board
circuit controller) that can be controlled by the the operating system. Windows 95
will controll this when the user clicks is ready to Shutdown the system.
Figure 3-3: Simple ATX Power ON/OFF Controller
JP 16
Figure 1-3:
KP6-FX 2
I/O back
panel Layout
Case (chassis) Power
ON/OFF button
PS/2 Mouse
PS/2 Keyboard
Parallel Port
COM2 COM1 USB