Eclipse - Fujitsu Ten CD1200 - Manual (Page 19)

How to operate the CD/MP3/WMA/AAC player
19
IV
* Does not support WMA files recorded at a frequency of 48kHz with a bit rate of 96kbps.
Playable AAC file standards
• Supported standards:
AAC-LC(MPEG-4)
• Supported sampling frequencies:
8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 (kHz)
• Supported bit rate:
3~320 (kbps)
* Supports VBR (3~320kbps).
• Supported channel modes:
monaural, stereo, joint, dual
ATTENTION
Depending on the encoding method used, this device may not be able to play back some types of
AAC file.
ID3/WMA tag
MP3/WMA files have an “ID3 / WMA Tag” that allows input of information so that data such as song
title and artist can be saved.
This main unit supports ID3v. 1.0, 1.1, and WMA tags.
ATTENTION
Tags for AAC files cannot be displayed.
Media
Media capable of playing MP3/WMA/AAC includes CD-R and CD-RW discs. Compared to CD-ROM
media commonly used for music discs, CD-R and CD-RW discs are fragile in high temperature/high
humidity environments and one section of the CD-R and CD-RW may become incapable of
playback. Fingerprints or scratches on the disc may prevent playback or cause skipping during
playback. Sections of a CD-R and CD-RW may deteriorate if left inside a vehicle for long periods of
time. It is also recommended that CD-R and CD-RW discs be kept in a light-blocking case because
the discs are vulnerable to ultra-violet light.