Sealey GSS3030 User Manual
Page 12
7.3.2 Attach channels 27F, 27E, 27A and 27B to the roofing panel using self tapping screws. Note that channels 27A
& 27B should be attached to the side of the panel that has pre-punched holes in it.
7.3.3 Attach channel connectors (66) to each side of the panel as shown above. Note that in this instance the
connectors are attached with self tapping screws from both sides.
7.3.4 Leave the four corners of the roof panel unfixed at this stage.
Assemble the second roof panel in the same way.
© Jack Sealey Limited
Original Language Version
GSS3030 Issue No.1 13/08/12
See also other documents in the category Sealey Equipment:
- SA0615 (7 pages)
- SAC2203B (8 pages)
- SAC2203B (6 pages)
- SAC2203B (6 pages)
- SSC12710D (14 pages)
- SAC0610E (4 pages)
- SAC10030 (4 pages)
- SSC11003 (9 pages)
- SAc3503B (6 pages)
- SSQC2409 (4 pages)
- SSQC2409 (4 pages)
- SSQC2409 (5 pages)
- SA1565 (5 pages)
- SA5055 (4 pages)
- SAC3203B3PH (6 pages)
- SAC72775BLN (6 pages)
- SAC55075B (5 pages)
- SAC03290 (3 pages)
- SAC05020 (4 pages)
- SAC106B (3 pages)
- SAC2203BLN (6 pages)
- ADB3000 (2 pages)
- SAC89025VLN (6 pages)
- CBOX2212V (1 page)
- PW2000 (5 pages)
- PW1712 (3 pages)
- PW4000 (4 pages)
- PW2500 (5 pages)
- PW5000 (5 pages)
- PWM1300 (7 pages)
- PWM2500SP (6 pages)
- LC300ST (2 pages)
- LC800ST (2 pages)
- LS1050V (4 pages)
- LS575VH (3 pages)
- LS520H (3 pages)
- LS450H (2 pages)
- LSH180V (2 pages)
- TP16 (1 page)
- TR3000 (2 pages)
- TP17 (2 pages)
- AK460DX (3 pages)
- AK466D (2 pages)
- TP69 (2 pages)
- TP6906 (3 pages)