Sealey AP2401M User Manual
Environmental protection
3.1
Before moving the tool chest ensure that the drawers are closed and locked (fig.1) to prevent accidental opening.
3.2
Each drawer is fitted with a self locking catch mechanism on the right hand side of the drawer underneath the handle, to open drawer push
the catch to the left to release the catch and pull the drawer open (fig.2).
WARNING! Only open one drawer at a time.
01284 757500
01284 703534
www.sealey.co.uk
Web
INSTRUCTIONS FOR:
MOBILE CHEST 4 DRAWER WITH BALL
BEARING RUNNERS
MODEL No:
AP2401M
1. SAFETY PRECAUTIONS
2. INTRODUCTION & SPECIFICATIONS
3. OPERATION
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
Important: READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INjURY AND WILL INvALIDATE THE WARRANTY. RETAIN
THESE INSTRUCTIONS FOR FUTURE USE.
1.1.
GENERAL SAFETY INSTRUCTIONS.
Read the operator’s manual carefully before using your tool chest.
Ensure drawers are fully closed and the self locking catch is activated before moving the tool chest.
Always use on a horizontal level surface where possible and beware of inclines greater than 5°. Store heaviest items in lowest drawers.
DO NOT overload tool chest (20kg per drawer maximum). DO NOT open more than one drawer at a time.
DO NOT step, stand or sit on the tool chest. DO NOT allow children to play with the tool chest.
Fig.1
Fig.2
Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and carry
heavier loads. Each drawer fitted with a catch to prevent unexpected opening when being moved around the workshop. Added security provided by side
mounted cylinder locks, supplied with two keys. Unique design incorporates perforated side panels for hanging tools and accessories. Ideally suited for
the
Sealey Premier range of Modular Tool Trays. Fitted with robust pulling handle and anti-shock protection on all four corners to minimise accidental
damage. Rust and solvent resistant powder coat paint finish. Fitted with Ø125mm wheels, two fixed and two with swivel castors, one with toe lock. Suitable
for use in garages, pits or by the mobile mechanic.
notE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Model
No
AP2401M
O/A Size (W x D x H)
690 x 465 x 555mm
Medium Drawer (x4)
533 x 398 x 58mm
865mm (handle elevated)
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
4. MAINTENANCE
Parts support is available for this product. To obtain a parts
listing, please log on to www.sealey.co.uk,
email [email protected] or phone 01284 757500.
4.1
Clean externally with a lightly moistened cloth and mild detergent, periodically lubricate and clean drawer runners with a lightly oiled cloth.
© Jack Sealey Limited 2013
Original Language Version
AP2401M Issue: 1 - 23/04/13
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR