Sealey AP2401 - Manual

3.1 Each drawer is fitted with a catch mechanism on the right hand side
of the drawer underneath the handle, to open drawer push the catch
to the left to release the catch and pull the drawer open (fig.1).
WARNING! Only open one drawer at a time.
3.2 Before moving the tool chest ensure that the drawers are closed and
locked (Fig.2) to prevent accidental opening.
01284 757500
01284 703534 [email protected]
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
email
INSTRUCTIONS FOR:
TOP CHEST
MODELS:
AP2401 & AP2403
1. SAFETY PRECAUTIONS
2. INTRODUCTION & SPECIFICATIONS
3. OPERATION
4. PARTS
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
Important: READ THESE INSTRUCTIONS CAREFUllY. NOTE THE SAFE OPERATIONAl REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THIS PRODUCT CORRECTlY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
FAIlURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAl INjURY AND WIll INvAlIDATE THE WARRANTY. RETAIN
THESE INSTRUCTIONS FOR FUTURE USE.
1.1. GENERAl SAFETY INSTRUCTIONS.
 Read the operator’s manual carefully before using your tool chest.
 DO NOT open more than one drawer at a time.
 DO NOT step on the drawers.
 DO NOT let children near the tool chest.
 Ensure drawers are fully closed and the self locking catch is activated before moving the tool chest.
AP2401/AP2403 - 1 - 130208
Fig.1
AP2401
AP2403
Fig.2
Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and carry
heavier loads. Each drawer fitted with catch to prevent unexpected opening, when being transported around the workshop. Added security provided by
side mounted cylinder locks, supplied with two keys. Recessed handles permit units to be slotted in work environments where space is tight. Rust and
solvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage. Tough composite top allows
these units to be used as a workstation.
Model No AP2401 AP2403
Overall Size
Width
690mm
Depth 465mm
Height 400mm 535mm
Drawers (Qty) 4 6
Drawer Width 533mm
Drawer Depth 391mm
Drawer Height 58mm
notE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Optional Accessories
Model No
Description
AP24ACC6 Drawer Divider 3 x 395 x 58mm
AP24ACC9 Short Hook Set x 10pcs
AP24ACC10 Medium Hook Set x 10pcs
Part No Description Part No Description
AP2401.02 Drawer (Medium) AP2401.08 Anti Shock Protection (Pair)
AP2401.05 Ball Bearing Slide 35mm (Pair) AP2401.09 Drawer Handle
AP2401.06 Ball Bearing Slide 27mm (Pair) AP2401.10 Key
AP2401.07 Plastic Worktop AP2401.11 Drawer Handle Lock