Sealey TPS94 - Manual

01284 757500
01284 703534
[email protected]
www.sealey.co.uk
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
INSTRUCTIONS FOR:
MOBILE BIN STORAGE SYSTEM WITH 94 BINS
MODEL No:
TPS94
1. SAFETY INSTRUCTIONS
1.1. GENERAL SAFETY

WARNING! Ensure Health & Safety, local authority, and general
workshop practice regulations are adhered to when using this rack.

Locate rack in a suitable work area.

Keep the work area clean, uncluttered and ensure there is adequate
lighting.

WARNING! Use rack on level and solid ground, preferably concrete.

Keep the rack clean and tidy in accordance with good workshop
practice.

DO NOT use the rack for any purpose other than that for which it is
designed.

Keep children and unauthorised persons away from the work area.
2. SPECIFICATION
3. ASSEMBLY
3.1. Attach castors x 4 to the underside of the bottom deck.
3.2. Attach upright supports (1) to bottom deck.
3.3. Connect brace supports (2) to upright supports (1) and bottom
deck.
3.4. Attach top (3) to uprights (1).
3.5. Attach cross braces x 7 (only 4 shown on diagram) to the
upright support brackets (4).
NOTE! Ensure all centre support holes on the cross braces are in
alignment with each other.
3.6. Attach centre support (5) to cross braces.
3.7. Ensure all fixings are secure.
CROSS BRACES x 7
BRACKETS
(4)
BRACE (2)
BRACE (2)
BOTTOM DECK
CENTRE
SUPPORT
(5)
UPRIGHT
SUPPORT
(1)
UPRIGHT
SUPPORT
(1)
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Powder coated steel racking with plastic storage bins positioned
evenly on both sides. Mounted on heavy-duty castors for mobility.
Capacity:. . . . . . 64 small bins (110 x 160 x 75mm)
. . . . . . . . . . . . 30 large bins (150 x 235 x 125mm)
Rack Height:. . . . . . . . . . . . . . . . . . . . . . . 1245mm
Rack Width: . . . . . . . . . . . . . . . . . . . . . . . . 940mm
Rack Depth: . . . . . . . . . . . . . . . . . . . . . . . . 500mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33kg
TOP (3)
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
© Jack Sealey Limited Original Language Version
TPS94 Issue No: 3(L) - 06/03/14