Sealey AP20BP - Manual

1.1 GENERAL SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using
this bench back panel.
 Locate bench and back panel in a suitable working area.
 Keep the work area clean, uncluttered and ensure there is adequate lighting.
 WARNING! Use bench on level and solid ground, preferably concrete.
 Keep the bench and back panel clean and tidy in accordance with good workshop practice.
 Keep children and unauthorised persons away from the working area.
 DO NOT use the bench or back panel for any purpose other than that for which it is designed.
 DO NOT undertake work on the bench without the workpiece being adequately secured.
 DO NOT overload the back panel.
InstrUctIons for:
BACK PANEL FOR
HEAVY-DUTY WORKBENCHES
MoDEL no: AP20BP
Original Language Version AP20BP Issue: 1 - 19/02/10
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3. CONTENTS
2. INTRODUCTION & SPECIFICATION
Heavy-duty perforated steel panel, finished in a powder coat to help prevent corrosion. to be fitted to AP2020, AP2020BB,
AP2010, AP2030 and AP2030BB extending the storage area available. suitable for hanging tools, keeping them close to hand
when needed. Helps work area to stay neat and tidy when in/not in use.
size (W x H): . . . . . . . . . . . . . . . . . . . 1366 x 680mm
corner Brackets X2
self tapping
screws X6
screws X6
Back panel X1