Sealey AP3 User Manual
Instructions for model no, Fig.1, Safety instructions

3 drawer unit for ap10 and
ap30 series workbenches
InstructIons for model no:
ap3
thank you for purchasing a sealey product. manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1. safetY instructions
IMPORTANT: pLease read these instructions carefuLLY. note the safe operationaL reQuireMents, warninGs & cautions.
use the product correctLY and with care for the purpose for which it is intended. faiLure to do so MaY cause
daMaGe and/or personaL inJurY and wiLL inVaLidate the warrantY. pLease keep instructions safe for future use.
2. introduction and specifications
1.1 GeneraL safetY
warninG! Ensure Health & Safety, local authority, and general
workshop practice regulations are adhered to when using this
drawer unit.
locate bench with drawer unit in a suitable working area.
Keep the work area clean, uncluttered and ensure there is
adequate lighting.
warninG! use bench with drawer unit on level and solid
ground, preferably concrete.
Keep bench and drawer unit clean and tidy in accordance
with good workshop practice.
Keep children and unauthorised persons away from the working
area.
warninG! neither the drawer unit or bench to which it is fitted
are electrically insulated and both are therefore not suitable for
electrical repairs of any sort.
do not use bench or drawer unit for any purpose other than
that for which it is designed.
do not use a bench with drawer unit fitted outside.
do not get bench or drawer unit wet, or use in damp
or wet locations or areas where there is condensation.
do not clean bench or drawer unit with any solvents which
may damage the paint surface.
warninG! Workbenches with drawer units are heavy and
assistance should be obtained before moving them.
AP3 - 1 - 12/04/07
optional three drawer unit for added drawer space on any of the
AP10 or AP30 series workbenches. manufactured with steel plate for
industrial durability and finished in red gloss to prevent corrosion.
With lockable drawers the unit can be installed on the left or right of
the workbench.
individual draw size: Height 120, depth 525, Width 340mm.
overall size of unit: Height 535, depth 575, Width 400mm.
3. contents
01284 757500
01284 703534
sole uk distributor
sealey Group,
Bury st. edmunds, suffolk.
www.sealey.co.uk
Web
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMportant: no liability is accepted for incorrect use of this product.
warrantY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
inforMation: for a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
carefully unpack the 3 drawer add on unit. check that it has not been
damaged in transit and that the following items are included:
1. chassis containing 3 drawers and drawer keys.
2. drawer retaining plate with two self tapping screws.
4. asseMbLY
on the wider benches with alternative runner positions decide
whether the drawer unit is to be placed on the left on on the right. lift
the drawer unit and slide the outward turned flanges at the top of the
unit sides onto the inwards turned flanges of the runners beneath the
bench top, see fig.1A. Push the unit fully in until it stops. screw the
drawer unit retaining plate into position on the back of the drawer unit
using the holes and self tapping screws provided. ensure that the
flange at the top of the retaining plate faces inwards and bears
against the ends of the runners, see fig.1B.
fig.1