Sealey AP2030 - Manual (Page 2)

3. ASSEMBLY
STEP 1. Take two crossrails (B) and bolt them
to the cabinet sides (A) using 8 bolts (O), 8
lock washers(P), and 8 nuts (Q). Ensure that
the pairs of holes that accept the corner braces
are facing downwards. ( Refer to STEP 7.)
STEP 2. Bolt the two centre supports (C) to the
front and back crossrails respectively using 4
bolts (O), 4 lock washers(P), and 4 nuts (Q).
STEP 3. Bolt left & right slide panels (D) & (E)
into position using 8 bolts (O), 8 lock washers
(P), and 8 nuts (Q). Fix 5 left hand female
slides (L), onto slide panel (D) and 5 right hand
female slides (L), onto slide panel (E)
Refer to Diagram 11 on how to fit slides.
STEP 4. Take two crossrails (B) and bolt them
to the cabinet sides (A) and centre supports (C)
using 12 bolts (O), 12 lock washers (P), and 12
nuts (Q).
STEP 5. Take the two draw stops (G) and one
back panel (F) and bolt them to the back of the
cabinet with the draw stops between the panel
and the cabinet. Bolt the other back wall panel
into position using bolts (O), lock washers (P),
and nuts (Q).
STEP 6. Bolt the two shelf components (H) into
position in the left hand compartment using 8
bolts (O), 8 lock washers(P), and 8 nuts (Q).
AP2030 - 2 - 120702