Sealey CST983 User Manual

Fig.1, Instructions for: sack trucks model no's, Safety instructions 2. specification 3. assembly

CST983.V2-01 Wheel

CST983.V2-02 Wheel Fixings

CST983.V2-03 Handle Grip

CST986.V2-01 Pneumatic Wheel

CST986.V2-02 Wheel Fixings

CST986.V2-03 Handle Grip

CST987.V2-01 Pneumatic Wheel

CST987.V2-02 Wheel Fixings

CST987.V2-03 Handle Grip

CST988.V2-01 Pneumatic Wheel

CST988.V2-02 Wheel Fixings

CST988.V2-03 Handle Grip

CST994.V2-01 Pneumatic Wheel

CST994.V2-02 Wheel Fixings

CST994.V2-03 Handle Grip

1. SAFETY INSTRUCTIONS

2. SPECIFICATION

3. ASSEMBLY

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE

AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor

Sealey Group,

Bury St. Edmunds, Suffolk.

www.sealey.co.uk

We b

CST983.V2, CST986.V2, CST987.V2, CST988.V2, CST994.V2 Issue: 1- 12/01/09

Fig.1



Always load evenly with the centre of gravity of the load as near the centre and rear of the plate as possible.



Obtain additional support for large or wide loads to prevent tipping.



DO NOT overload the truck - see Specification.



DO NOT leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.



DO NOT use truck on uneven ground and do not run over curbs or steps - use a ramp.



DO NOT allow others to ride on the truck.



DO NOT use the truck if any part is damaged, paying particular attention to the wheels.

Strong tubular steel construction with welded joints. Heavy-duty wheels feature steel inserts for added strength and durability. Can be rested on

handles for flat loading. Fitted with rubber handgrips.

5 . PARTS

INSTruCTIONS FOr:
SACK TRUCKS
MODEL No's:

CST983.V2, CST986.V2,

CST987.V2, CST988.V2, CST994.V2

Model No. . . . . . . . . . . . . . CST983.V2 CST986.V2 CST987.V2 CST988.V2 CST994.V2

Max. Load. . . . . . . . . . . . . . . . . . .150kg . . . . . 200kg . . . . . 200kg . . . . . 250kg. . . . . . 300kg

Wheel Diameter . . . . . . . . . . . . 210mm . . . . 250mm . . . . 250mm . . . . 250mm. . . . . 250mm

Wheel Thickness . . . . . . . . . . . . 50mm . . . . . 90mm . . . . . 90mm . . . . . 90mm. . . . . . 90mm

Height . . . . . . . . . . . . . . . . . . .1170mm . . . 1100mm . . . 1190mm . . . 1260mm. . . . 1100mm

Overall Width . . . . . . . . . . . . . . 460mm . . . . 550mm . . . . 545mm . . . . 560mm. . . . . 520mm

Platform Depth . . . . . . . . . . . . . 220mm . . . . 180mm . . . . 255mm . . . . 220mm. . . . . 250mm

3.1

Wheels. Ensure axle is clean from dust and dirt to allow free movement of the wheel.

3.2

For Model No's. CST987.V2, CST988.V2 and CST994.V2 the axle (Fig.1.1) needs to be put through the frame before the wheels can be

attached.

3.3

Slide the wheel (Fig.1.2) onto the axle, put on the washer (Fig.1.3) and complete by pushing the split pin (Fig.1.4) through the hole in the

end of the axle and bending over to retain.

3.4

repeat for the other side.

4.1

Model CST983.V2 has solid tyres whilst Models CST986.V2, CST987.V2, CST988.V2 & CST994.V2 have pneumatic tyres.

4.2

CST983 can be rested on its handles for flat loading.

4.3

CST988 is a case carrying model with a high back, 'P' handle and flat loading capabilities.

4. FEATURES