Sealey SG1000 - Manual

page 1
InstructIons for :
GANTRY CRANE ADJUSTABLE
1TONNE
MoDEL no
:
SG1000
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. CONTENTS
2. GENERAL
section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.
section 2.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.
section 2.2. technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.
section 3. safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.
section 4. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.
section 5. operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . 2
section 6. Maintenance/Inspection/Examination . . . . . . . . . . . . . . 3.
section 7. owner's an operator's responsibilities . . . . . . . . . . . . 3
section 8. Declaration of conformity. . . . . . . . . . . . . . . . . . . . . . . 4.
section 9. Parts List and Diagram . . . . . . . . . . . . . . . . . . . . . . . . . 5.
Page No.
2.1. Identification
supplier: sealey Power Products,
Kempson Way,
suffolk Business Park,
Bury st Edmunds,
suffolk, IP32 7Ar.
Model no: sG1000
2.2. Technical Data.
Rated Capacity
Working Load Limit (WLL) 1tonne (tested to 50% overload).
Maximum Lift Height: . . . . . . . . . . . . . . . . . . . . . . . . . 3600mm
Minimum Lift Height: . . . . . . . . . . . . . . . . . . . . . . . . . 2400mm
Gantry Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400mm
Maximum Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200mm
Maximum Lifting capacity . . . . . . . . . . . . . . . . . . . . . . .1000kg
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128kg
Original Language Version sG1000 Issue: 1 - 13/02/13 © Jack sealey Limited
3. SAFETY INSTRUCTIONS
3 Keep gantry crane, chain block, trolley, lifting slings, support and beams in good working order and condition. follow the
inspection requirements as described in section 6, Maintenance. Take immediate action to repair or replace damaged parts by
contacting your supplier. Ensure that all accessory lifting devices are suitably certified. If gantry is damaged, remove from service
immediately.
3
Ensure the surface on which the gantry crane is to be used is level, firm and capable of supporting the weight of the gantry
crane with maximum load - we recommend concrete. Never use the gantry on tarmacadam or other soft surfaces, as the
gantry may sink in.
3 Keep children and unauthorised persons away from the working area.
3 Keep working area clean and tidy, free from unrelated materials and ensure that there is adequate lighting.
3 Ensure that load (including the weight of the chain block and trolley) does not exceed the maximum lifting capacity of the gantry
crane. overloading the gantry crane is dangerous.
3 To avoid injury, be fully aware of your own and other persons locations in relation to the lifting, and lowering, of the load.
3 Keep a sound footing and balance, and ensure the floor is not slippery, and wear non-slip footwear.
3 Ensure that crossbeam is level.
7 DO NOT attempt to alter crossbeam height whilst under load.
7 DO NOT harness the load at an angle or use any attachments not verified as fit for purpose.
7 DO NOT allow the load to swing during lifting.
7 DO NOT allow the load to drop suddenly. Lower load with care, ensuring that you are fully aware of the condition of the surface onto
which the load is to be placed.
7 DO NOT position any part of your body beneath the load.
7 DO NOT use the gantry crane to move or transport a load. the gantry crane is a lifting support device only.
7 DO NOT use this product to perform a task for which it is not designed.
7 DO NOT use whilst under the influence of drugs, alcohol or intoxicating medication.
7 DO NOT climb on the gantry crane.
3 When not in use store in a safe, dry, childproof area.
3 This gantry crane is designed for lifting within a garage or workshop environment.
 WARNING! Failure to heed safety and warning instructions may result in damage and/or personal injury and will invalidate the
warranty.