Assembly / storage instructions, Owner’s & operator’s responsibilities – Sealey PT1000 User Manual
Page 3

Page 3
5. ASSEMBLY / STORAGE INSTRUCTIONS
5.1
ASSEMBLY.
Note: Numbers in brackets refer to item numbers as shown in diagram below.
5.1.1 Measure the actual width of the runway beam.
5.1.2 Evenly assemble the required number of spacer washers to the inside of the trolley side plates so that the dimension between trolley
wheel flanges (2) are 6mm (MAX) greater than the runway beam width.
5.1.3 Assemble the remaining washers outside the trolley side plates (1) and fit the washers and nuts (7 & 8) to the hanger pin (10).
Note: There must always be at least one washer on the inside and the outside of each trolley side plate.
5.1.4 slacken the hanger pin nuts (8) and spread the side plates (1) so that the wheels (2) can be slipped over the runway beam.
5.1.5 screw the nuts (8) firmly against the washers (7) then suspend a light load from the trolley to ensure that all four wheels (2) contact
the runway beam.
5.1.6 tighten the nuts and then secure with the second (lock) nut.
5.2
STORAGE.
When not in use store in a safe, dry childproof location.
The owner and/or operator shall study these instructions and retain them for future use.
a)
Understanding instructions and warnings.
the owner and/or operator shall understand the operating instructions and warnings before operating the trolley.
Warning information must be emphasised and understood.
If the operator is not fluent in English, the product instructions and warnings must be read to, and discussed with, the operator in the
operator’s native language by the owner, making sure the operator understands the contents.
b)
Damaged Trolleys.
Any trolley which appears to be damaged, badly worn, or operates abnormally Must BE rEMoVED froM sErVIcE!
It is recommended that necessary repairs be made by an authorised service agent.
c)
End of service.
through years of normal wear, the trolley will eventually become unserviceable. When this happens dispose of in accordance with
local authority regulations.
6. OWNER’S & OPERATOR’S RESPONSIBILITIES
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
Pt500.V2, Pt1000.V2, Pt2000.V2, Pt3000.V2 Issue: 1 - 15/04/10