Sealey LH251 User Manual
Lever hoist, Model no: lh251, Instructions for

Page 1
InstructIons for:
LEVER HOIST
MoDEL no:
LH251
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. GENERAL
1. CONTENTS
section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.1. Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 2.2. technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
section 3. safety/operational Instructions. . . . . . . . . . . . . . . . . . .2.
section 4. Maintenance/Examination/Inspection. . . . . . . . . . . . . .2.
section 5. Assembly and storage. . . . . . . . . . . . . . . . . . . . . . . . . .3.
section 6. owner’s & operator’s responsibilities. . . . . . . . . . . . .3.
section 7. Declaration of conformity. . . . . . . . . . . . . . . . . . . . . . .4.
Page No.
Page No.
2.1.
Identification
supplier:
sealey Power Products,
Kempson Way,
suffolk Business Park,
Bury st Edmunds,
suffolk, IP32 7Ar.
Model no: LH251
2.2. Technical Data (A, C, D, K and L refer to fig.1)
Model No:. . . . . . . . . . . . . . . . . . . . . . .LH251
capacity: . . . . . . . . . . . . . . . . . . . . . . . . 250kg
test Load: . . . . . . . . . . . . . . . . . . . . . . . 375kg
Load chain Ø:. . . . . . . . . . . . . . . . . . . . . 4mm
Pulling Effort to Lift full Load:. . . . . . . . .25kgf
Head room: . . . . . . . . . . . . . . . . . . . . 220mm
chain falls:. . . . . . . . . . . . . . . . . . . . . . . . . . 1
chain Length: . . . . . . . . . . . . . . . . . . . . 1.2mtr
Lever Length
(L): . . . . . . . . . . . . . . . . 160mm
overall Width
(C): . . . . . . . . . . . . . . . . . 85mm
overall Depth
(A):. . . . . . . . . . . . . . . . . 92mm
operating clearance: . . . . . . . . . . . . . . 60mm
Hook Aperture
(K): . . . . . . . . . . . . . . . . 20mm
Maximum Hook capacity Ø
(D):. . . . . . 30mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . 2kg
a)
Design capability: test Load 50% overload.
b)
for applications - see section 3.
c)
for information on parts and materials requiring specialised
repair techniques - see section 4.
d)
Ambient operating temperature is between -10°c and +50°c.
fig.1
Original Language Version
LH251 Issue: 1 - 19/04/10