Fig.9 fig.8, Maintenance – Sealey AK4562D User Manual
Page 4
6.1.
Changing the Digital Meter Battery
6.1.1. Remove the rubber protective cover from the meter.
6.1.2. Remove the screw and cover from the side of the meter.
6.1.3. Remove and replace battery (fig.8).
6.1.4. Replace cover and secure with screw.
6.1.5. Replace the protective rubber cover.
Note: If the LCD display does not activate, remove the meter as in section 5.6.1, press
button 1 (fig.7.1) to reboot the meter.
6.2.
Before every use visually check the supply hose for damage and check all joints
for leaks, any damaged component must be replaced or leaks repaired before
using.
6.3.
Check the nozzle valve for leaks, if it does not seal, replace before using.
6.4.
Drain air regulator water trap daily.
6.5.
Top up lubricator as required, using a quality air tool oil.
6.6.
To change the silencer, remove the circlip (fig.9) and remove the old
silencer, place a new silencer into the recess and refit the circlip.
Note: For any other maintenance and repairs the unit should be returned to your
Sealey dealer.
AK4562D Issue: 2(P) - 02/09/14
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Original Language Version
© Jack Sealey Limited
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
6. MAINTENANCE
fig.9
fig.8
Battery Removal
Remove the battery as per the instructions in section 6.1. Dispose of it according to local government guidelines.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s
registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.