Maintenance – Sealey PW5000 User Manual
Page 5
WARNING! Ensure the pressure washer is switched off and unplugged from the mains electrical power supply and turned off at the
mains water tap before performing any maintenance tasks.
Check, clean or renew the inlet filter (which is fitted inside the inlet connector,) after every 50 hours of use.
Use only genuine Sealey spares for this machine. Failure to do so could result in personal injury and will invalidate the warranty.
7.1.
Nozzles
7.1.1.
Ensure that nozzles are kept clean and free of debris.
7.1.2. Clear the nozzle of any debris.
7.1.3. Flush the nozzle with water.
7.1.4. Reconnect the nozzle to the lance. Ensure that the nozzle connection is tight.
7.2.
Water Filter.
7.2.1. The pressure washer is equipped with a water inlet filter to protect the pump.
7.2.2. Backflush the filter to clean.
7.2.3. Replace filter and quick connection immediately to prevent any ingress of foreign matter into the pump.
7.3.
Cooling System.
The air vent at the rear of the motor, must be kept clean and free of any obstructions to ensure proper air cooling during operation.
WARNING! Prevent water from penetrating the vent to minimise the risk of damage to the machine and to reduce the risk of shock
to the operator.
7.4. General.
Check unit, gun, nozzle, hose, connections and cables for damage. Immediately replace or repair with genuine parts.
7.5. Storage.
7.5.1. Store in a location where the washer will not be subject to freezing conditions.
7.5.2. Make sure that the pressure washer has been drained of water and remove the hoses.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycle centre and disposed of in a manner which is compatible with the environme
WEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment. When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your
local solid waste authority for recycling information.
7. MAINTENANCE
Original Language Version
PW5000 Issue: 1 - 14/03/13
© Jack Sealey Limited
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to:
www.sealey.co.uk, email: [email protected] or phone:01284 757500.