Sealey SAC05020 - Manual (Page 4)

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORtANt: no liability is accepted for incorrect use of this product.
WARRANtY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMAtION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park ,
Bury st. edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
email
Original Language Version sAc05020 Issue: 2 - 21/10/11
6. tROUblESHOOtING
Fault Cause Remedy
Pressure drop in the tank. Air leaks at connections.
run compressor to max. pressure, switch off unit.
Brush soap solution over connections and look for
bubbles. tighten connections showing leaks.
If problem persists contact Authorised service
Agent.
Pressure switch valve leaks when compressor is
idle.
non-return valve seal defective.
empty the air tank, remove the non-return valve
cap (fig.5.2) and clean, or if necessary, replace
the seal (fig.5.1). located under motor cowling.
compressor stops and does not restart. motor failure. contact Authorised service Agent.
compressor does not stop at max. pressure.
Pressure switch fault. contact Authorised service Agent.
Head gasket or valve fault. contact Authorised service Agent.
compressor noisy with metallic knock. Bearing or piston damage. contact Authorised service Agent.