Epson 5020UB - Manual (Page 61)

Using WirelessHD
61
Connecting the WirelessHD Transmitter
To prepare your device to work with the WirelessHD button on the remote control, follow
these steps:
1. Follow the instructions on the previous page and place the transmitter within range of the
projector.
2. Plug the AC adapter into the transmitter and an electrical outlet.
3. Connect HDMI cables to your video devices and the HDMI ports on the side and back
of the WirelessHD Transmitter.
Note: You can connect up to five input sources to the transmitter.
4. To use the WirelessHD Transmitter as a pass-through device to a television or other
display, connect an HDMI cable to the display device and the HDMI output port on the
back of the transmitter.