Epson 5020UB - Manual (Page 45)

Making Detailed Adjustments
45
Color Settings
If the image colors don’t look correct, you can adjust them using these settings. Use the first
three settings described below to make the most visible changes. If you only need to make
slight adjustments, you can fine-tune the picture with the remaining settings. Most color
settings are stored separately for each image source and color mode.
■ Color Saturation
Note: This setting cannot be used with a signal input through the PC port.
Adjusts the color intensity of the image.
■ Tint
Note: This setting cannot be used with a signal input through the PC port.
Shifts the color balance between magenta and green.
■ Abs. Color Temp.
Shifts the color balance between red and blue, making the image appear warmer or
cooler.
■ Skin Tone
Makes fine adjustments to the tint and controls the amount of red or green in the image.
Also useful for correcting black-and-white images, if they look tinted.
■ RGB
Use the RGB settings to fine-tune the color of the image. You can adjust the offset and
gain for each signal color (red, green, and blue). Use
Offset to adjust darker shades and
Gain for the lightest shades.
Image > Color Saturation
Image > Tint
Image > Abs. Color Temp.
Image > Skin Tone
Image > Advanced > RGB