Epson 5020UB - Manual (Page 76)

76
Maintenance
Checking the Projector Status
You can use the Info menu to view information about the current display settings and how
long the projection lamp has been in use. To access the Info menu:
1. Press the Menu button on the projector or remote control.
2. Use the menu navigation buttons to open the Info menu. The following information
appears:
Note: The information displayed depends on the currently selected image source. The Lamp
Hours shows 0H until you’ve used the lamp for at least 10 hours.
The resolution indicates the total number of scan lines in the source signal. The number of visible
scan lines depends on the signal format standard and selected display settings (see page 89).
Storing the Projector
If you need to store the projector for an extended time, do the following:
■ Make sure the temperature of the storage area is within 14 to 140 °F (–10 to 60 °C).
■ Retract the adjustable front feet.
■ Remove the batteries from the remote control.
■ Pack the projector in its original packaging or equivalent.
■ Lamp Hours ■ 3D Format
■ Source ■ Sync Info
■ Input Signal ■ Video Signal
■ Resolution ■ Deep Color (color depth)
■ Scan Mode ■ Status (error information)
■ Refresh Rate ■ Serial Number