Solutions to common problems, Common washing problems, con’t – Electrolux Wave-Touch 137023200 A User Manual
Page 40
40
Common Washing Problems, con’t
Solutions to Common Problems
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE MEASURES
Pilling
(Fibers ball up
and cling to
fabric.)
Pilling is normal with syn-
•
thetic and permanent press
fabrics. This is due to abra-
sion from normal wear.
Use a lint brush or shaver to
•
remove pills.
Use fabric softener in the
•
washer to lubricate fibers.
When ironing, use spray
•
starch or fabric finish on
collars and cuffs.
Turn items inside out to
•
reduce abrasion.
Residue or
powder on dark
items;
Stiff, harsh
fabrics.
Undissolved detergent.
•
Some granular detergents
•
can combine with hard
water minerals to form a
residue.
Overloading the washer.
•
Rewash load.
•
Increase water temperature
•
using hottest water safe for
fabric.
Do not overload washer.
•
Use liquid detergent or
•
use nonprecipitating water
conditioner with powder
detergent.
Wrinkling
Overloading the washer.
•
Incorrect wash cycle for
•
wash load.
Reduce load size.
•
Rinse in cold water with liq-
•
uid fabric softener using the
casual or delicate cycle.
Do not overload washer.
•
Remove items from washer
•
as soon as cycle is com-
pleted.
Use liquid fabric softener.
•
Yellow buildup
of body soil on
synthetic fabrics
Agitation time too short.
•
Wash water temperature
•
too low.
Not enough detergent.
•
Soak in detergent booster
•
or product containing
enzymes.
Wash in hottest water safe
•
for fabric using
casual
cycle.
Increase detergent.
•
Add bleach safe for fabric
•
or treat with color remover.
Select correct wash cycle.
•
Use correct amount of
•
detergent.
Wash synthetics frequently
•
using hot or warm water.
Yellow or brown
rust stains
Iron or manganese in water
•
supply, water pipes, or
water heater.
To restore discolored load
•
of whites, use rust remover
safe for fabric.
Do not use chlorine bleach
•
to remove rust stains. It
may intensify discoloration.
Use nonprecipitating water
•
softener.
Before washing, run hot
•
water for a few minutes to
clear lines.
Drain water heater occa-
•
sionally.
For an ongoing problem,
•
install an iron filter in your
water supply system.