Installation – Enviro C-10608 User Manual

Page 23

Installation

YPICAL

HROUGH

ALL

ITH

XTERIOR

LOWER

NSTALLATION

- H

ORIZONTAL

ERMINATION

��

��
��
��

��

��
��

��

Install an amour coated electrical cable from the exhaust blower housing, through the wall thimble plate

and attach to the pre drilled hole in the left hand rear hopper pillar. Hook up to wires from the exhaust

blower wiring harness.
All electrical connections must be in accordance to local code requirements

NOTE:

Ensure that all vent connections are installed by placing a small bead of high temperature silicone at each

chimney connection.

Also ensure that all vertical vent sections are properly supported and that all clearances to combustibles

are maintained in accordance with the vent manufacturer’s specifications.

Figure 23: Through Wall Installation with Exterior Blower Kit.

Figure 24: Through Wall Installation with Exterior Blower Kit; Side View.