Eagle Electronics IntelliMap 500C User Manual
Page 123
117
wanted to, you could select another waypoint from the list with the
↑ or
↓ keys.)
A. To navigate to the waypoint, press
ENT
. (The Go To Waypoint
command is already highlighted.) The unit will show navigation infor-
mation to the waypoint.
B. To find the waypoint, press
→ to
F
IND
O
N
M
AP
|
ENT
. The Map
Page appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press
EXIT
re-
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press
↑ or ↓ to change the first
letter, then press
→ to move the cursor to the next letter and repeat
until the name is correct, then press
ENT
|
ENT
. B. Or you can jump
down to the lower selection list by pressing
ENT
, then press
↓ or ↑ to
select a waypoint from the list, then press
ENT
. The waypoint informa-
tion screen appears.