Eagle Electronics IntelliMap 500C User Manual
Page 106
100
From the Trails Menu, press
↓ to
O
PTIONS
|
ENT
|
↓ to
U
PDATE
C
RITERIA
.
Press
← or → to select criteria type|
ENT
.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mi.
With one of the Update Criteria selected, use the cursor arrows to high-
light either the
U
PDATE
R
ATE
or
U
PDATE
D
ISTANCE
data entry boxes and
press
ENT
. Press
↑ or ↓ to change the first character, then press → to
the next character and repeat until the entry is correct. Press
EXIT
to
return to the Trail Options Menu.
Trail Options menu: Update Time Rate setting, left,
and Update Distance setting, right.
Specific Trail Options
Delete Trail
To delete a specific trail: From the Trails Menu, press
↓ to Trail
Name|
ENT
. The Edit Trail menu appears as seen in the following fig-
ure. Press
↓ to
D
ELETE
T
RAIL
|
ENT
|
← to
Y
ES
|
ENT
.