Fig.2, Fig.3, Fig.4 – Sealey BM33 User Manual

Page 2

Text mode
Original mode

5.2. Use screw (B) to bolt through the walls, base and wheels, secure with washer (G) and nut (J). Make sure steerable wheels are fitted to the end

opposite the steel bumper. See fig.2

fig.2

5.3. Screw on bottom tray using screws (L) and washers (E). See fig.3.

fig.3

5.4. Assemble the lower rear wall, locate each lug into the right and left hand walls, then fit the upper rear wall, locating its lugs as before. See

fig.4.

fig.4

Original Language Version

BM33 issue: 1 - 03/03/14