Sealey BM33 - Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
1. SAFETY INSTRUCTIONS
3. TECHNICAL SPECIFICATIONS
2. dESCRIPTION
1.1. GENERAL SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice
regulations are adhered to when using this trolley.

dO NOT overload the trolley.

dO NOT drop loads on to shelves.

dO NOT place hot (above 100°C) items on to shelves.

Load shelves with the heaviest items on the lower shelves.

Use the trolley in a suitable work area.

Keep the work area clean, uncluttered and ensure there is adequate lighting.

Keep the trolley clean and tidy in accordance with good workshop practice.

dO NOT use the trolley for any purpose other than that for which it is designed.

dO NOT stand on the trolley, use it as a ladder or allow others to ride on the trolley.

Use the wheel locks to prevent the trolley from inadvertently moving.

dO NOT leave unattended, especially when loaded, unless the wheels are locked, chocked
or the trolley otherwise secured.

dO NOT use trolley on uneven ground and dO NOT run over curbs or steps - use a ramp.

dO NOT use trolley if any part is significantly damaged, paying particular attention to the wheels.

Keep children and unauthorised persons away from the work area.
Carefully unpack the product and check the contents against the diagram and parts list below. Should any items be missing or damaged contact your
Sealey dealer.
inSTrUCTionS for:
JANITORIAL/HOUSEKEEPING CART
MoDEL no: bm33
Manufactured from high impact polypropylene. This janitorial/housekeeping cart is ideal for storing and transporting a variety of cleaning equipment.
fitted with three internal shelves and two lockable doors to keep goods secure. Also features a large open top storage area with multiple
compartments. fitted with two large detachable vinyl zip bags, two 8" lockable castors. features 4 broom holders on back of unit and corner bumpers
to prevent damage to walls and doors.
5. ASSEmbLY
Dimensions:......................................1155 x 570 x 1128mm
4. CONTENTS
Original Language Version BM33 issue: 1 - 03/03/14 © Jack Sealey Limited
Important: REAd THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREmENTS, WARNINGS ANd CAUTIONS.
USE THIS TROLLEY CORRECTLY ANd WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENdEd. FAILURE TO dO SO mAY CAUSE
dAmAGE OR PERSONAL INJURY ANd WILL INvALIdATE THE WARRANTY. RETAIN THESE INSTRUCTIONS FOR FUTURE USE.
5.1. Fit the left hand and right hand wall to the base assembly. See fig.1.
fig.1