United Office ULGD 350 A1 - Manual (Page 12)

10 ULGD 350 A1
GB
NOTICE
► Only after hot lamination: When the fi nished laminated pouch is
ejected from the pouch ejector slot of the laminator, it is hot and can
easily change its shape. For this reason, let the laminated pouch cool for
one minute before touching it.
► To improve the lamination result, you can weigh a still hot laminated pouch
down with a book, a fi le folder or any other heavy, fl at object. This will
give it a smooth and fl awless surface.
♦ When you no longer wish to start another lamination process, turn the pouch
thickness switch
4 to the position ABS and disconnect the power cable.
Anti-blocking function
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance.
♦ Turn the anti-blocking switch 4 to the position ABS. The pouch will no longer
be drawn in.
♦ Remove the pouch and turn the anti-blocking switch 4 back to the desired
pouch thickness.
♦ Re-start the lamination process.
Cleaning
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance.
► Ensure that moisture cannot permeate into the appliance during cleaning.
IMPORTANT
Possible damage to the appliance.
► Do not use aggressive or abrasive cleaners as they may damage the surface
of the housing.
♦ Clean the housing of the appliance only with a lightly moistened cloth and
a mild detergent.
IB_72508_ULGD350A1_LB4.indb 10 04.07.12 10:31