Switching the heat function on/off, Replacing the fuse – Ultimate Speed UAMM 12 B1 User Manual
Page 55
52
UAMM 12 B1
GB
Switching the heat function on/off
♦
Press the ON
9
button to switch on the seat cushion
. The display
5
shows MODE
0
.
♦
Press the
6
button to switch on the heating function. The display
5
shows the symbol for the heating function
.
♦
Before the 30 minutes have elapsed, you can press
6
, to switch off
the heating function.
Replacing the fuse
There is a fuse in the 12 V car adapter
11
for protecting the vehicle's on-board
power supply. If the appliance no longer works, check the fuse and replace if
necessary.
♦
Open the 12 V car adapter
11
by turning the screw attachment
C
gently
anticlockwise (using pliers if necessary) and remove it along with the plug
tip
B
.
♦
Remove the fuse
A
from the 12 V car adapter
11
.
♦
Insert a new fuse (type 3A 250 V) into the 12 V car adapter
11
. Screw the
screw attachment
C
together with the plug tip
B
back onto the 12 V car
adapter
11
.
NOTE
►
If the appliance still does not function, or the fuse blows again immediately,
there is a defect. Please then contact the Service Hotline (see chapter
Service).
11
A
B
C
IB_90543_UAMM12B1_LB1.indb 52
IB_90543_UAMM12B1_LB1.indb 52
05.09.13 13:09
05.09.13 13:09