Ultimate Speed MULTI-PURPOSE CAR BRACKET - Manual (Page 19)

• In case of failure to observe the safety guidelines,
the holder or the appliance may come loose and
be damaged. Consequential damages cannot be
ruled out.
• When passing on to third parties, please include
the user manual and safety guidelines.
• Store the safety guidelines together with the
appliance.
Installation Instructions
1. Fastening the holder on the holding arm:
a. Insert the suction cup’s
4 claws into the holder’s
4 hole system. Hold it
vertically so that the
2 holding feet face
downward.
b. To connect securely, push
the holder downward until it
clicks into place.
c. To remove the holder, push it
upward.
2. Fastening the suction
cup to the windscreen
a. The ambient temperature should
be above 15°C (59°F) for an
optimal and secure adhesion of
the suction cup. If the
ambient temperature
is not above 15°C (59°F),
warm the surface with a
hairdryer. Press the sucker
firmly onto the base and
move the suction lever
1
to create a vacuum
between the base and the
sucker.
b. In order to remove the fastening system from the
base, pull up the suction lever 1 and pull on the
vacuum tab 2 to release the vacuum.
77159_LB1_DE_AT_CH_NL_GB_130913.indd 19 13.09.13 08:36