Ultimate Speed Universal Washing Brush - Manual (Page 12)

12
GB
Operation
Initial start-up
The brush can be fitted to all standard gar-
den hoses.
1. Connect the brush to the garden hose:
- Attach the supplied quick-adapter
(4) to the thread (3) on the end of the
brush.
- Attach the other end of the quick-adap-
ter (4) to the garden hose.
2. Open the water supply.
3. Open the control valve (5)
ON
on the quick-adapter (4). Water will
begin to flow and the inner brushes will
rotate.
4. The water supply can be regulated by
rotating the control valve (5).
5. Close the control valve (5) OFF
and shut off the water sup-
ply when finished. The brush can be re-
moved by pulling on the red ring on the
quick-adapter (4).
Using cleaning agents
Use a commercially-available, biodegra-
dable neutral cleaning agent (for ordering
information, please see „Spare parts/
accessories“).
Always use the cleaning agent in ac-
cordance with the manufacturer‘s instruc-
tions.
1. Unscrew the cap (2) from the cleaning
agent tank (OPEN) and fill the
tank with cleaning agent. Screw the cap
(2) back on to the cleaning agent tank
(CLOSED) .
2. The cleaning agent
supply (SOAP) can be
regulated by rotating the
dosing ring (1).
Cleaning/maintenance/
storage
• Clean the brush head thoroughly with
clear water before and after each use to
remove dirt and foreign bodies.
• The brush does not require maintenance.
• Store the brush in a frost-resistant place.
Waste disposal and environ-
mental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Replacement parts /
Accessories
Spare parts and accessories can be
obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre via telephone.
Please have the order number mentioned
below ready.
Detergent ............................. 30990010
Quick-adapter (4) .................. 91105000
Cap for cleaning
agent tank (2) ....................... 91105001
OFF
SOAP