Ultimate Speed Z29511 - Manual (Page 5)

7 GB
Pull the trolley jack out from under the vehicle
and fully lower the lifting arm
2 .
Close the release valve 5 by turning it
clockwise.
Cleaning and Care
Never use harsh or corrosive cleaning agents.
Liberally grease all external moving parts.
Clean the hydraulic trolley jack using a
slightly oily cloth.
Fully lower the lifting arm 2 and lifting
handle sleeve 6 to be able to store the
trolley jack in the smallest possible space.
Maintenance and Service
Note: Refilling or topping up with hydraulic
oil may only be carried out by specialist
personnel! Always use hydraulic oil that fulfils
the specification for ISO VG 15. Please note
that filling with too much oil may adversely
affect the functioning of the vehicle jack. Fill
with a maximum of 115 ml oil when all the
oil has been used.
Defective hydraulic vehicle jacks must be
repaired by a specialist workshop only.
Never attempt to repair the hydraulic vehicle
jack yourself.
Never take the hydraulic vehicle jack to
pieces. Taking the vehicle jack to pieces
yourself may result in it not working properly.
Disposal
The packaging and ancillary packing
consist entirely of environmentally-
friendly materials. They can be dis-
posed of at your local recycling facility.
In the interest of the environment, do not throw
out the product with your household refuse.
Take it to a suitable centre where it can be dis-
posed of properly. Your local council will be
able to tell you where the collection centres are
located and their opening times.
Dispose of the hydraulic oil in an environmentally
compatible manner. Ask your local repair garage
to see to its disposal or find your nearest waste
materials collection centre.
Service
GB
Service Great Britain
Tel.:
0871 5000 720
(0,10 GBP/Min.)
e-mail: [email protected]
IAN 66308
Informations
Declaration of Conformity
We, Milomex Ltd., c / o Milomex Services, Hilltop
Cottage, Barton Road, Pulloxhill, Bedfordshire,
MK45 5HP, UK, hereby declare under our sole
responsibility that the product: Hydraulic Trolley
Jack, Model No.: Z29511, Version: 06 / 2011,
to which this declaration refers, complies with the
standards / normative documents of 2006 / 42 / EC.
Related harmonised standard:
EN 1494 / A1:2008
Description of product:
Hydraulic trolley jack
Model no.: Z29511
Version:
06 / 2011
… / … / Maintenance and Service / Disposal / Service / Informations
66308_uls_Wagenheber_Content_LB4.indd 7 27.05.11 15:43