beautypg.com

Ultimate Speed Z30866 User Manual

Introduction / safety advice, Workshop creeper board, Introduction

background image

3

GB/IE

Introduction / Safety advice

Workshop Creeper Board

Introduction

Familiarise yourself with the product prior
to assembly. Carefully read the following
assembly instructions and safety tips.

Only use the product as instructed and only for the
indicated field of application. Keep instructions in a
safe place. Submit all documents to a third party if
distributing the product.

Proper Use

The workshop creeper board is intended for working
in a lying or seated position at a low working height.
The product is intended for domestic, non-commercial
use only. The product is not suitable for use as a
support or climbing aid. Use only the supplied pur-
pose-made parts in the assembly of the product,
otherwise the safety of the product cannot be ensured.
Any use other than that described or any modification
of the product is not permissible and may result in
injury and / or damage to the product. The manu-
facturer is not liable for damage caused by improper
use. The product is not intended for commercial use.

Description of Parts

1

Creeper (with head cushion)

2

Castor

3

Bolt

4

Nut

5

Plain washer

6

Sleeve

7

Cap

8

T socket wrench

Technical data

Max. load: 120 kg
Dimensions: approx. 47 x 100 x 12 cm
Weight:

4.8 kg

Included items

Note: When you are unpacking the components,
make sure that you do not unintentionally throw
away any of the assembly materials. Check that all
the items are present and that the product and all its
parts have no defects immediately after unpacking.
Do not assemble the product if any of the included
items listed below are missing.

 1 Creeper (with head cushion)
 6 Castors
12 Bolts
12 Nuts
12 Plain washers
12 Sleeves
12 Caps
 1 T socket wrench
 1 Assembly instructions

Safety advice

KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR
FUTURE REFERENCE!

DANGER OF

LOSS OF LIFE AND ACCIDENT
TO INFANTS AND CHILDREN!

Never leave children unsupervised with the
packaging materials. Danger of suffocation.
Keep out of the reach of children. It is not a toy.

DANGER TO LIFE! During

installation keep children away from the area
in which you are working. The scope of supply
includes a number of screws and other small
parts. These may prove life-threatening if swal-
lowed or inhaled.

CAUTION! Do not leave children unattended.
The product is not a climbing frame or toy.
Make sure that nobody, especially a child,
climbs or lifts themselves up by the product.
This may result in injury and / or damage.

CAUTION! RISK OF INJURY! Please en-
sure that no parts are damaged and that all
parts are correctly assembled. Incorrect assembly

63830_uls_Kfz-Rollbrett_Content_IE-HU-HR.indd 3

19.05.11 12:52