Tronic TLGL 1000 A1 - Manual (Page 8)

TRONIC TLGL 1000 A1
6 - English
This charger is intended to be used exclusively to charge NiMH, NiCd and Li-Ion batteries.
Never try to charge any other rechargeable or even non-rechargeable batteries, as these can
overheat during the charging process and explode. It is only suitable to charge the following
types of rechargeable batteries:
NiMH (1.2V x 1 to 6 cells AAA, max. 1500mAh/cell)
NiCd (1.2V x 1 to 6 cells AAA, max. 1500mAh/cell)
NiMH (1.2V x 1 to 6 cells AA, max. 3000mAh/cell)
NiCd (1.2V x 1 to 6 cells AA, max. 3000mAh/cell)
NiMH (1.2V x 1 to 4 cells C, max. 6000mAh/cell)
NiCd (1.2V x 1 to 4 cells D, max. 9000mAh/cell)
Li-Ion (3.6V/3.7V x 1 cell, max. 3000mAh/cell, max. charge voltage 4.2V)
Note:
Warning: Use only for certified Li-Ion rechargeable batteries of mobile phone, camcorder,
digital camera.
Do not use any damaged or leaking batteries to avoid any danger.
Batteries must never be opened or deformed. Otherwise any leaking battery fluids may cause
injuries. If the battery fluid becomes in contact with the skin or eyes, rinse immediately with
plenty of water and seek medical aid.
You can wipe off any leaked battery fluid by using a dry, absorbing cloth. Always wear
protective gloves! Avoid any skin contact.
Copyright
All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the
author is strictly forbidden. This also applies to any commercial use of the contents and information.
All texts and diagrams are up-to-date as of the date of printing. Subject to change without notice.
Before you start
Please unpack the charger and remove all packaging material.
Inspect the charger for any damage. If the charger is damaged, do not use it.