Problems with external video equipment – Epson 50 User Manual
Page 54
54
Problem Solving
You can’t change the language on a DVD.
The DVD might not include multiple languages.
Problems with External Video Equipment
No picture appears on the screen.
■
Make sure the equipment is turned on.
■
Press the
button on MovieMate or on the remote control.
■
Press the
or
Play
button on the external equipment.
■
Make sure you don’t have cables connected to more than one video port. You can only
use one connection at a time (see page 21).
You see the message
No Signal
.
■
Make sure the equipment is turned on.
■
Make sure your cable(s) are connected correctly (see page 21).
■
Press the
button on MovieMate or the remote control to select the external video
source. Allow a few seconds for MovieMate to sync up.
You see the message
Signal not supported.
Press the
button on the remote control and check the
Video Signal
setting (see
The picture is cut off (too large) or too small.
Press the
button on the remote control and select the appropriate aspect ratio.
The picture is distorted.
■
If you’re using an extension cable, electrical interference may affect the signal.
■
Check the solutions on pages 52 and 53.
The colors are not right.
■
Press the
button on the remote control and check the
Video Signal
setting (see