Resetting the lamp timer – Epson 50 User Manual

Page 46

Text mode
Original mode

Caring for Your Epson MovieMate

6. Gently insert the new lamp and tighten its screws.

Caution: Don’t touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.

7. To replace the lamp cover, slide it into position, then tighten the screw. (MovieMate

won’t work if the lamp cover is loose.)

8. After replacing the lamp, you need to reset the lamp timer, as described in the next

section.

Resetting the Lamp Timer

1. Connect the power cable and press the

button to turn MovieMate on.

2. Press

on the remote control. You see the Visual Setup menu.

3. Press

to highlight

Info

, then press

to select it.

4. Press

again. You see the following on the screen:

5. Select

Yes

and press

to reset the timer.