Elite Screens 235 - Manual (Page 9)

9
Rev.051811‐AS
www.elitescreens.com [email protected]
Please follow these instructions carefully to ensure proper maintenance and safety with your
Cinema235 Screen.
1. When hanging the screen up, please make sure that no other objects such as power switches, outlets,
furniture, ladders, windows, etc. occupy the space designated for your Fixed‐Frame screen.
2. Regardless if the screen is hung on or installed into the wall, make sure that the proper mounting
anchors are used and that the weight is supported appropriately by a strong and structurally sound
surface just as any large and heavy picture frame should.
(Please consult a home improvement specialist for the best advice on installation)
3. Frame parts are made of high quality velour‐surfaced aluminum and should be handled with care.
4. When not in use, cover over the screen with a furniture sheet to protect it from dirt, grime, paint or
any other impurities.
5. When cleaning, use a damp soft cloth with warm water to remove any marks on the frame or screen
surface.
6. Never attempt to use any solutions, chemicals or abrasive cleaners on the screen surface.
7. In order to avoid damaging the screen, avoid touching it directly with your fingers, tools or any other
sharp or abrasive objects.
8. Spare Parts should be placed out of reach of small children in accordance with household safety
guidelines.
1. The projection screen frame is made of high‐quality aluminum alloy and should be handled with care.
2. Use a soft cloth with warm water to remove any spots on the screen surface.
3. To avoid damaging the screen material, never attempt to use any solutions, chemicals or abrasive
cleaners on the screen itself and never attempt to touch screen with your fingers or sharp/abrasive
objects.
Caution
Warning