Elite Screens 235 - Manual (Page 6)

6
Rev.051811‐AS
www.elitescreens.com [email protected]
Black Backing for AcousticPro1080 Models
This procedure only applies to models with AcousticPro 1080 Material. The Black Backing counters the
effects of light penetration that would otherwise light up all items behind the screen and spoil the
picture. Attach the Black Backing behind the projection surface and secure to the Velcro‐Faced Fix
Plates.
After the material has been installed, the backing will lie over the back of the white (AcousticPro1080) material and
then be held into place by the fix plates as they are added (fig. 1‐3). Interval markings reveal the suggested points
of attachment (fig. 1). The prongs on the fix plates (fig.2) straddle a lip on the back of the frame creating a friction
to hold the material in place (fig.3‐4).
Fig.1 Fig.2
*An alternate way to attach the black backing to the back of the AcousticPro1080 material is to utilize the Velcro
tabs located on the outer surface of the fix plates (fig.3‐4)
Black backing
Fix plate secures AcousticPro1080 material and
the black backing behind it.
AcousticPro1080 Screen Material
Cover by Black backing
Fix Plate
Black backing
Tension Rod (stretches the
AcousticPro1080 material)
Fig. 3 Fig. 4