Florabest FLV 1200 A1 - Manual (Page 16)

16
GB
Trouble shooting
Problem Possible cause Remedy
Abnormal noises,
clatter or
vibrations
Foreign body on cylinder
( 20/21)
Remove foreign body
Damaged sprung tines (
20) or cylinder knives (
21)
Exchange cylinder
Cylinder ( 20/21)
incorrectly mounted
Install cylinder correctly (see
“Exchanging the cylinder”)
Toothed-belt slip
Switch device off and pull power
plug. Remove the soil and grass
residues available.
Implement does
not start
No power
Check power socket, cable, line;
repair only by qualified electrician
Starting lever ( 2)
defective
Repair by After-Sales Service
Carbon brushes worn out
Motor defective
Motor fails
Blocked by foreign body Remove foreign body
Grass is too long
Mow beforehand; see chapter
“Operation”
Clogged discharge Clean discharge
Overload protection tripped Allow implement to cool down for
about 1 minute
Work result not
satisfactory
Sprung tines of aerator
cylinder ( 20) worn out
Exchange cylinder
Knives of verticutor cylinder
( 21) blunt or damaged
Exchange cylinder
Toothed belt defective Repair by After-Sales Service
Transport Position or
incorrect Working Position
selected
Select Working Position 1 or
Readjust Position 2-4 (see chapter
“Setting the Working Positions”)
Grass is too long
Mow beforehand; see chapter
“Operation”