Florabest FLV 1200 A1 - Manual (Page 10)

10
GB IE
• Ensure that all nuts, bolts and screws
are firmly tightened and that the imple-
ment is in a safe working state.
• Never try to repair the implement your-
self, other than you have been trained
accordingly. All work that has not been
listed in these Instructions must only
be carried out by authorised servicing
agencies.
• Treat the implement with the greatest
care. Always keep the tool clean for
better and safer work. Follow the main-
tenance instructions.
• Never overload the implement. Always
work within the specified capacity
range. Do not use low-power machines
for heavy-duty work. Do not operate
the implement for purposes for which it
is not intended.
Electrical safety:
CAUTION! The following states how
to avoid accidents and injuries due
to electric shock:
• Before each use, carry out a visual
inspection of the power and extension
cables for signs of damage or ageing.
Damaged mains power cables increase
the risk of electric shock.
• Connect the implement to a power
socket with a residual-current circuit
breaker that has a rated current of not
more than 30 mA.
• Always keep the extension cable well
away from the cutting tools.
Should the power cable become
damaged during work, then instantly
disconnect the power cable from the
mains. DO NOT TOUCH THE POWER
CABLE BEFORE IT HAS BEEN DISCON-
NECTED FROM THE MAINS! Risk of
electric shock.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
• Keep the extension cables away from
the sprung tines. The tines may dam-
age the cables and result in contact
with live parts.
• Check that the mains voltage is the
same as indicated on the rating plate.
• Avoid body contact with earthed parts
(e.g. metal fences, metal posts). There
is an increased risk of electric shock if
your body is earthed.
• Only use approved extension cables
of the type H05RN-F with a maximum
length of 75 m and which have been
approved for open-air use. The strand-
ed cord diameter of the extension ca-
ble must be at least 2.5 mm 2 . Always
unreel a cable drum to its full length so
that the entire cable can be checked for
damage.
• Use the envisaged cable suspension
when attaching an extension cable.
• Never pull the cable to disconnect the
plug from the socket. Protect the cable
from heat, oil and sharp edges.
• If the connecting cable is damaged,
first disconnect the extension cable from
the socket. You can then disconnect the
connecting cable of the equipment.
Assembling instructions
Prior to any work on the implement
always disconnect the plug from the
power socket!
Ensure during assembly that the
power cable is not squeezed and
that it has sufficient play.