Epson RS830 - Manual (Page 27)

27
PUSH STICK
Make fr
om 1/2
" OR 3/4
" WOOD
or
thickness less than
width of material to be cut.
Cut her
e to push 1/4
" wood.
Cut her
e to push 1/2
" wood.
1/2
" Squar
es
CONSTRUCTINg A PUSH STICK
When ripping work less than 6" wide, a push-stick should be used to complete the feed and could easily be
made from scrap material by following the pattern shown in Fig. 83.
Make a push-stick from plywood or softwood, equal to or less than the width of the material to be cut.
Notch
to
help
pr
event
hand
fr
om
slipping.