Florabest FRM 1800 B2 - Manual (Page 6)

6
GB
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass bag. Addition-
ally, the equipment is height adjustable to
six levels and has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
specifications
Electric Lawnmower ...FRM 1800 B2
Motor input power .....................1800 W
Mains voltage .................. 230 V~, 50 Hz
Idling speed ...........................3250 min -1
Blade width ...................Approx. 440 mm
Cut height ............................20 – 70 mm
Protection class ................................. II
Protection type .................................IPX4
Weight ......................................15.1 kg
Lawn bag volume ............................. 52 l
Sound pressure specification
(L
pA
) .................85 dB (A); K
pA
= 3 dB (A)
Noise level specification
measured (L
WA
)
...............94.1 dB (A); K
wA
=2.1 dB (A)
guaranteed ....................... 96.0 dB (A)
Vibration on the handle
(a
n
) ....................1.8 m/s 2 ; K= 1.5 m/s²
Do not exceed the maximum permitted
network impedance of 0.277 Ohms at the
electrical connection point
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
General Description
Scope of Delivery
Carefully remove the equipment from the
packaging and check whether the follow-
ing parts are complete:
- Lawnmower and curved handle with
connection cable
- Lower bar
- Lawn bag
- 2 wing nuts and screws for attaching
the curved handle
- 2 butterfly nuts for attaching the curved
handle
- 2 holders to attach the
connection cable
- Translation of the original instructions
for use
Overview
A 1 Curved handle
2a Butterfly nuts
2b Wing nuts
3 Lower bar
4 Grass bag
5 Cut height adjusting lever
6 Wheels
7 Lawnmower housing
8 Handle
9 Collision guard
10 Cable holder
11 Release button (not visible)
12 Power cable outlet
13 Cable strain relief
14 Power cable
15 Start lever
C 16 Screws
E
21 Level gauge
I 22 Blade screw
23 Blade
24 Motor spindle