Florabest FHT 600 B2 - Manual (Page 42)

42
GB
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting the
user should be based on estimated exposure
under actual usage conditions (all parts of
the operating cycle are to be considered, in-
cluding, for example, times during which the
power tool is turned off and times when the
tool is turned on but is running idle).
Notes on Safety
Before working with the equipment,
familiarise yourself with all operating
components. Practice handling the
equipment and have the function,
operation and working methods
explained to you by an experienced
user or specialist. Ensure that you can
shut off the equipment immediately in
an emergency. Inappropriate use of
the device may result in serious injury.
Symbols in the manual
Warning symbols with infor-
mation on damage and injury
prevention.
Instruction symbols (the instruction is
explained at the place of the excla-
mation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
Symbols on the Equipment
Caution!
Read through the instruction manual
carefully.
Wear eye and ear protection.
Do not use the hedge trimmer in the
rain or on wet hedges.
Pull out the power plug immediately
if the cable is damaged, has been
badly twisted or is completely cut
through and in the event that the
device is left unattended for a short
time.
Information of the acoustic power
level L
WA
in dB.
Machines are not to be place with
domestic waste.
Safety class II
Cutting length
General Safety Directions for
Power Tools
WARNING! Read all safety di-
rections and instructions. Omis-
sions in the compliance with safety
directions and instructions can cause
electrical shock, fire and/or severe
injuries.