Technical data, Disposal/environment, General service – Florabest FBM 575 A1 User Manual

Page 10

ENGLISH -

tECHNICAL DAtA

Model

FBM 575 A1

Engine

B&S575EX

Displacement

140 cm

Nominal engine output (note 1)

2,1 kW

Engine speed

2900 rpm

Spark plug

Champion QC12YC

Fuel capacity

0,75 l

Oil capacity

0,44 l

Engine oil

SAE 30/SAE 10W-30

Weight empty tanks

31 kg

Sound power, measured (see note 2)

94 dB(A)

Sound power, guaranteed LWA (see note 2)

95 dB(A)

Sound pressure level at operators ear, (see note 3)

86 dB(A)

Vibrations (see note 4)

< 2,5 m/s

Cutting width

460 mm

Cutting height

6 step (30, 39, 51, 64, 79, 95mm)

Cutter

Rotary blade

Speed

4,7 km/h

Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical

production engine for the engine model measured to SAE standard J1349/ISO1585. Mass pro-

duction engines may differ from this value. Actual power output for the engine installed on the

final machine will depend on the operating speed, environmental conditions and other values.

Note 2: Noise emissions in the environment measured as sound power (LWA) in conformity with EC

directive 2000/14/EC.

Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical

statistical dispersion (standard deviation) of 1.2 dB(A).

Note 4: Vibration level according to EN 836, Annex G. Reported data for vibration level has a typical

statistical dispersion (standard deviation) of 0.2 m/s

DIsPosAL/ENVIroNMENt

Perform service and maintenance according to the

instructions in this manual. In this way the engine

will last longer and the hazardous emissions are

minimized.
When the machine is worn out it should be di-

sposed of for recycling. Drain oil and gasoline

tank according to Engine Operator's Manual, and

take the machine to a recycle centre for proper

disposal. Do not poor oil or gasoline into the sink.
Plastics and metals can be separated for

recycling. Do not throw the grass clip in the

garbage can, but use this as compost material.
Please contact your service centre for further

information.

GENErAL sErVICE

We are pleased that you have purchased a pro-

duct from our company. If, despite of all quality

assurance, a defect occurs, you should contact the

Authorized Servicecentre in your country stated

at the back of this manual.
Make sure you have all the necessary equipment

data at hand; it can be found on the label of each

product. The Service Agent will determine the

next steps with you. If repairs are necessary, the

device must be handed in to the Service Centre.