Using the hose reel, Using the spray nozzles, Maintenance, cleaning and care – Florabest Z23463 User Manual
Page 5: Disposal, Information declaration of conformity

5
GB
Installation / Maintenance, cleaning and care / Disposal / Information
Using the hose reel
Hold the end of the hose firmly when unwinding
the hose and pull the hose out of the hose reel
2
.
The hose reel
2
has an automatic stop
function which ensures that the hose is kept at
the desired unwound length. As the hose is
unwound a click sounds from the stop function
every metre. When the desired length has been
unwound, pull out the hose carefully a little fur-
ther until the next click sounds. The hose is then
fixed at the desired unwound length and can
be placed on the ground without it springing
back into the housing by itself.
If you wish to unwind more of the hose, hold
the hose firmly and proceed as described above.
The automatic stop function is cancelled by
pulling the hose quickly past the next click and
then guiding the hose back carefully by hand
into the hose reel
2
.
You can regulate the water jet by turning the
spray nozzle
9
.
Note:
Reduce the pressure if the hose cannot be
properly guided into the housing with the tap
turned on. Either allow some water to flow out
of the hose or turn the water off.
If the hose does not wind back on to the reel
return under its own power, hold it slightly
above hip-height and guide it carefully back
onto the reel.
Using the spray nozzles
Attach the spray nozzle
9
onto the hosepipe
connector with water stop function
10
.
To adjust the water discharge, turn the green
part of the spray nozzle. The spray nozzle can
be used to interrupt the discharge of water. The
connector with the water-stop function interrupts
the water flow when the nozzle is removed
from the turned-on tap. Only use these two
functions for intermittent interruptions of the flow
of water. Never leave the hose unsupervised in
such instances.
Maintenance,
cleaning and care
If the hose reel
2
drips, lift the side cover
3
using a screwdriver. Check the connection
between the reel and the hose and replace the
screw-on cap firmly.
Clean the housing using a slightly moist,
fluff-free cloth.
To clean the inside of the reel, open the door
provided for this purpose on the top of the
hose reel
2
(see Fig. I).
Spray the inside with a vigorous jet of water
and then close the door (see Figs. J, K, L).
Disposal
The packaging is made entirely of
recyclable materials, which you may dis-
pose of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
Information
Declaration of conformity
We, OWIM GmbH & Co. KG, Stiftsbergstraße 1,
D-74167 Neckarsulm, hereby declare under our
sole responsibility that the product: Wall-Mounted
Hose Box, Model No.: Z23463, Version: 12 / 2012,
to which this declaration refers, complies with the
standards / normative documents of 2006 / 42 / EC.
Related harmonised standard:
EN ISO 12100-2:2003+A1:2009
The complete declaration of conformity can be
viewed at: www.owim.com.