Florabest FHT 600 A1 - Manual (Page 13)

13
GB
Trouble Shooting
Problem Possible cause Fault correction
Device does not
start
Mains voltage not on
Check plug socket, cable, line and
plug, where appropriate, have repaired
through electrical specialist
On/Off switch ( 6)
defective
Repair by Service Centre
Worn carbon brushes
Defective motor
Device runs with
interruptions
Power cable is damaged Check the cable and have it changed
by the Service Centre if necessary
Internal loose electrical
connection
Repair by Service Centre
On/Off switch ( 6)
defective
Blades become
hot
Blades are blunt
Have the blades ( 2) sharpened or
replaced (Service Centre)
Blades are notched
Have the blades ( 2) checked or
replaced (Service Centre)
Too much friction due to
lack of lubrication
Oil the blades ( 2)