Florabest FHM 38 A1 - Manual (Page 8)

8
GB
strip sticks slightly.
4. Check the setting by turning the
blade cylinder. None of the blade
cylinder blades should be in
contact and grinding on the sub-
blade.
5. Return the machine key (3) and
the metal strip (feeler gauge) (4)
to the tool holder (cf. 5).
If it is no longer possible to adjust
the cutting clearance, the blade
cylinder and sub-blade must be
replaced as a set.
Storage
• Keep the machine dry and out of
reach of children.
For space-saving storage, loosen
the wing nuts and fold the handle
bar together.
Guarantee
• This appliance has a 36-month guar-
antee; a shorter 12-month guarantee
applies if the appliance is to be used
for commercial purposes or for re-
placement appliances according to
statutory regulations.
• Justified guarantee claims should be
reported to our Service Centre (see
page 49 for telephone & fax no.s, and
email address). Our Service Team will
tell you more about our complaints
handling procedure.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain com-
ponents are subject to normal wear
and tear and are excluded from the
guarantee. These include in particular:
blade cylinder and sub-blade.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair. This
requires that the appliance is returned
to our service center undismantled
and with proof of purchase and guar-
antee.
• Repairs, which are not covered by
the guarantee, can be carried out for
charge by our service center. Our
service center will be glad to provide
you with a cost estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
• Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
• Defective units returned to us will be
disposed of for free.