beautypg.com

Florabest FAH 18 A User Manual

Page 5

background image

5

GB

Symbols on the battery

Do not dispose of

batteries in house-

hold waste, fire or

water.

max. 60°C

Do not subject the battery to

strong sunlight over long periods

and do not leave it on a heater

(max. 60°C).

Take batteries to an old battery

collection point where they will be

recycled in an environmentally

friendly manner.

Symbols on the recharger

WARNING

!

Before using for the first time, care-

fully read through the user manual

The recharger is for indoor use

only.

130°C

Protective temperature limiter

Protection class II

Electrical appliances must not

be disposed of with the domestic

waste.

General safety instructions for

power tools

WARNING! Read all safety direc-
tions and instructions.
Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.

Retain all safety directions and instruc-
tions for future use.

The term “Power Tools” used in the safety
instructions refers to mains-operated pow-
er tools (with power cord) and to battery-
operated power tools (without power cord).

1) WORK AREA SAFETY

• Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

• Do not operate power tools in ex-

plosive atmospheres, such as in the
presence of flammable Iiquids, gases
or dust.
Power tools create sparks
which may ignite the dust or fumes.

• Keep children and bystanders away

while operating a power tool. Distrac-
tions can cause you to lose control.

2) ELECTRICAL SAFETY

• Power tool plugs must match the

outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.

• Avoid body contact with earthed or

grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.

• Do not expose power tools to rain or

wet conditions. Water entering a power
tool will increase the risk of electric
shock.

• Do not abuse the cord. Never use the

cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords in-