Electro-Voice Speaker System - Manual (Page 31)

31 Owners Manual
Output 1-6 Parametric EQ
Band Type Frequency Slope Resp / Q Gain
6dB/oct.
12dB/oct.
6dB/oct.
12dB/oct.
PEQ 20Hz - 20000Hz 0.40 to 20 -15.0dB to +15.0dB
6dB/oct.
12dB/oct. 0.40 to 2.00
6dB/oct.
12dB/oct. 0.40 to 2.00
ALLPS1 20Hz - 20000Hz
ALLPS2 20Hz - 20000Hz 0.40 to 2.00
-15.0dB to +15.0dB
HISLV 20Hz - 20000Hz -15.0dB to +15.0dB
PARA EQ BAND 1-5 LOSLV 20Hz - 20000Hz
LOPASS 20Hz - 20000Hz
HIPASS 20Hz - 20000Hz
Delay (Output Channels)
DC-One’s output delays can be applied to
output channels OUT1 - OUT6 and can be
used to compensate for the positioning of
cabinets or speaker arrays relative to each
other or the original sound source.
The Delay parameter determines the delay
time of the corresponding channel or the
distance between different loudspeaker
clusters. The delay time or physical
distance is displayed in milliseconds,
microseconds, feet, inches, meters, or
centimeters.
To access the Delay screen, press the
Delay button found on the output
processing menu. Subsequent button
presses will toggle the display between
OUT1 to OUT6. Use the key tonavigate between Delay (-200.00ms to700.00ms) and Bypass (on/off). Thevalues for each parameter can be adjustedusing the up/down VALUE arrows.Here Output 5 and 6 are linked and their delay is set to 200 feet. Output 3 and 4 are
also linked and set to 100 feet. In this configuration, speaker outputs 5 and 6 are said to
be 200 feet in front of Main speaker output array 1 and 2. The effect of air temperature
on the actual delay time will also be automatically calculated based on the Temperature
Parameter in the Setup Menu. See Output Linking.564321Here we have Units set
to Feet to describe
physical distance be-
tween devices.Parametric EQ (Output Channels)Pressing the PEQ button places the currentpreset in Edit mode and jumpsThe LCD screen to a pre-selectedparametric EQ (bands 1-5). Subsequentbutton presses advances the display to thenext output channel (OUT1 to OUT6). Use the key to navigate
navigate between Delay (-200.00ms to
700.00ms) and Bypass (on/off). The
values for each parameter can be adjusted
using the up/down VALUE arrows.
Here Output 5 and 6 are linked and their delay is set to 200 feet. Output 3 and 4 are
also linked and set to 100 feet. In this configuration, speaker outputs 5 and 6 are said to
be 200 feet in front of Main speaker output array 1 and 2. The effect of air temperature
on the actual delay time will also be automatically calculated based on the Temperature
Parameter in the Setup Menu. See Output Linking.
5
6
4
3
2
1
Here we have Units set
to Feet to describe
physical distance be-
tween devices.
Parametric EQ (Output Channels)
Pressing the PEQ button places the current
preset in Edit mode and jumps
The LCD screen to a pre-selected
parametric EQ (bands 1-5). Subsequent
button presses advances the display to the
next output channel (OUT1 to OUT6). Use the
between the PARA EQ BAND (1-5), Type, Frequency, Q and Gain parameters.
Adjust the values of each parameter using the up/down VALUE arrows.
For detailed
EQ plot im-
ages please
see page 45